This guide was created by a community member and reviewed by us. Firmware and router interfaces may change over time, so some steps may differ depending on your device or version.
Requirements:
- Keenetic / Netcraze router with a USB port
- USB flash drive of at least 256MB
- Log in to the router’s admin panel using the default address: 192.168.1.1 or asusrouter.com.
- Go to the VPN section and select the VPN Fusion tab.
- Generate an OpenVPN configuration file using the configuration generator and select the Linux configuration.
- In the Server List, click “Add Profile” or the plus icon (⊕).
- Enter any provider name in the “Connection Name” field, for example, “Xeovo”.
- In the “VPN Type” drop-down menu, select “OpenVPN”.
- Click “Import.ovpn file”, choose the generated OpenVPN configuration file (for example, “xeovo-no-udp.ovpn”),
- In the "Username" and "Password" fields below, enter your Xeovo account credentials and click “Apply and Enable” below
- The connection will be established automatically. The status will change to “Connected”. If this does not happen, make sure the toggle switch is set to ON.
- To verify the connection, visit DoesMyVPN.work.
How to disconnect
To disconnect the VPN, return to step 8 and switch the toggle next to your VPN connection name to OFF.