This guide was created by a community member and reviewed by us. Firmware and router interfaces may change over time, so some steps may differ depending on your device or version.
Prerequisites
- A router running a recent DD-WRT build.
- A Xeovo subscription.
- This guide was performed on
06-03-2026-r65291
Step 1
1.1. Go to the Xeovo website and log in to your account.
1.2. Open your account dashboard.
1.3. Go to the WireGuard Generator.
1.4. Select the country you want to connect through from the drop-down list.
1.5. Click Download.
Step 2
2.1. In your browser, open 192.168.1.1/index.asp and log in to the router.
2.2. Open Setup > Tunnels.
2.3. Click Import Configuration.
2.4. Select the .conf file you downloaded in step 1.
2.5. Under Tunnel oet1, give the tunnel a name you will recognize later.
2.6. Select the Kill Switch checkbox. The kill switch stops the router from passing traffic if the tunnel drops, so your connection never falls back to your normal, unprotected route.
2.7. Click Save & Apply.
2.8. To verify connection visit DoesMyVPN.work